Wallace Automation logoWallaceAutomation
← Back to overview

/ 03 - Discipline

Maintain.

PPM contracts · asset registers · condition monitoring · compliance

Wallace Automation builds maintenance regimes that take downtime off the shift plan. We run PPM around the operation, not against it - with asset data, condition monitoring and reports that pass audit the first time.

Across every
building type.

The equipment we cover at fulfillment centres, distribution centres and sort centres - and how we work on it.

●FC // Fulfilment Centre

Long-running buildings where small wear issues snowball into peak failures. PPM is planned to the minute around stow, pick and ship windows.

  • Conveyor PPM

    01

    Belt tension, roller, photo-eye, gearbox oil and motor thermal checks on a rolling schedule.

  • Robotics field upkeep

    02

    Drive surface cleaning, fiducial integrity audits and charging contact inspections.

  • Pack station PPM

    03

    Printer head, applicator and scale calibration to spec - pre-peak readiness checks.

  • HVAC & chiller PPM

    04

    F-Gas compliant chiller, AHU and FCU service with refrigerant logging.

  • LV & thermographic surveys

    05

    Annual thermographic scans of switchgear, busbar joints and DBs with reports.

  • Statutory compliance

    06

    LOLER, PUWER, PAT, fire shutter drop-tests and emergency lighting logs.

●DC // Distribution Centre

Heavy MHE and dock-side equipment with high impact risk. Maintenance is built around safety-critical inspections.

  • Racking inspections

    01

    Annual SEMA-qualified racking inspection with traffic-light reports and remedial works.

  • Dock equipment PPM

    02

    Leveller, shelter, restraint and shutter service to keep doors compliant and moving.

  • Forklift charger PPM

    03

    Charger, cable, connector and ventilation checks across charge rooms.

  • Sprinkler & fire systems

    04

    Wet/dry sprinkler service, ESFR head sampling, ASD detector calibration and weekly logs.

  • Generator & UPS service

    05

    Standby genset load-bank tests, fuel polishing and UPS battery impedance testing.

  • Yard & ANPR upkeep

    06

    Barrier, ANPR camera and gatehouse system maintenance with uptime reporting.

●SC // Sortation Centre

Short, intense operational windows. Maintenance has to land in narrow non-sort hours and bring the building back up clean.

  • Sorter PPM

    01

    Cross-belt, shoe-sort and tilt-tray scheduled service with induct and discharge alignment.

  • Telescopic loader service

    02

    Boom drive, hydraulics, photo-eye and trailer-loading light maintenance.

  • Compressed air systems

    03

    Compressor service, dryer dewpoint checks and ring-main leak surveys.

  • Scan tunnel calibration

    04

    DWS scale calibration, camera focus and lighting hood service to keep read-rates above target.

  • Controls health checks

    05

    PLC program backup, VFD parameter logging and HMI patching.

  • Condition monitoring

    06

    Vibration sensors and oil sampling on critical gearboxes with trend-based intervention.

/ Next discipline

Install.

Continue →Talk to an engineer